AC220V/110V Automatic Car Parking Boom Barrier Gate For Parking Lot
Auto-closing
Support the infrared photocell for anti-bumping function (optional)
Support external and internal vehicle loop detector (optional)
Traffic light interface (AC220V, can support lamp with 40W)
Wire control (switch signal)/Remote control (418MHZ)
Rs485 Communication module (optional)
Open,close control interface for parking system
Provide limit state signal to parking system
Product performance
1. Special rotating structure,no gear, no belt rotation,no maintenance,stable use,long life
2. The specially designed balance structure enables the brake lever to start slowly,run quickly,and stop slowly.
3. The jitter caused by the operation of the brake lever is eliminated.
4. The brake lever runs permanently at 90 degrees, and the 360-degree operation accident occurs after troubleshooting.
5. Specially designed low-speed aluminum housing motor, gearbox one-piece design, low noise, fast heat dissipation.
6. The drive mechanism is designed with an intelligent overheating protection system to control the temperature rise of the motor under frequent use.Make the motor not easy to burn out.
| Take-off and landing time | 1.5S 3S 6S |
| Working temperature | -25℃～+75℃ |
| Working humidity | ≤90%, no condensation |
| Power supply | AC 220V／50HZ |
| Fuse specification | φ5×20 5A |
| Power output | DC 12V ≤0.2A |
| Fall limit output | dry contact signal, normally open |
| Ceiling output | dry contact signal, normally open |
| Receiver working voltage | DC 5V |
| Encoder working voltage | DC 5V |
| Operating voltage of limit switch | DC 5V |
Product Tags:
|
|
Automatic Pole Barrier Gate Car Parking Lot Swing Gate AC220V/110V Images
|
